Cotter Pin, 5/64" dia x 3/4" length - MS24665-227

(No reviews yet) Write a Review
Ships same day if ordered by 3pm CST
Calculated at Checkout
  • Cotter Pin, 5/64" dia x 3/4" length - MS24665-227
  • Cotter Pin, 5/64" dia x 3/4" length - MS24665-227
MSRP: $0.26
FBO Price: $0.16
— You save $0.10
Frequently bought together:


Cotter Pins, 5/64" dia x 3/4" length, Used with AN3-4-5 bolts. Cadmium plated steel. Note: AN6-7-8 bolts use 3/32" hole size and AN9-10-11 bolts use 1/8" hole size.

Before ordering connecting rod bolts, check the configuration status of your connecting rod by referencing CMI SB00-3A (see page 7 & 8). P/N 530184 connecting rod (identified by casting number 530186), A35159 (identified by casting number 5561) and A35160 (also identified by casting number 5561) must be serviced as follows: 

P/N AEC530213, SA530213 bolt, P/N SA24804 or P/N 24804  nut, and P/N MS24665-227 cotter pin. 

Newest style: 655959 bolt utilizes nut 654487 or AEC626140 or SA626140 (self-locking) and no cotter pin is needed. 

Note: Continental does not make the 530213 bolt any longer, but still make nut P/N 24804



View AllClose

0 Reviews

View AllClose
Disclaimer: While reasonable efforts have been made to ensure all information on this website is accurate, Aircraft Specialties Services does not assume responsibility for any errors or omissions. All specifications, illustrations, data and prices are subject to change without notice. Applications and interchangeability information depicted on this website is strictly for reference only. Installers must consult the engine/airframe IPC for the manufacturer’s approved data. All prices "each" unless specified. Images represent attributes, not quantity. Application information is provided for reference only. Make sure to refer to the applicable airframe/engine manufacturer's manual for exact application information.